SHIJIAZHUANG DEYE PIPING INDUSTRY CO., LTD（Pipefittings Department)
Assistant of your pipeline projects for petro, Gas, Water One stop solution, Package products and good technical support
Add to Cart
3M Forged High Pressure Pipe Fittings Hex Nipple With Npt Bspt
High Quality ASME B16.11 Forged Screw-Threaded Nipples. A Hex. nipple is a length of hex.pipe with male threads on both ends. They are used to fit straight end hose or pipe. These Threaded Pipe Nippple are available in variousshapes, size, specification & thickness as per the clientsrequirments. These Nipples are widely used in variousapplication industry such as oil refineries, chemical processingpetrochemical, cement indutry etc.
Forged Hex. Nipple standard
| ASME: | ASME 16.11, MSS SP-79, MSS SP-95, 83, 95, 97, BS 3799 | |
| DIN: | DIN2605, DIN2615, DIN2616, DIN2617, DIN28011 | |
| EN: | EN10253-1, EN10253-2 | |
| ASME B16.11 | Forged threaded fittings:90-deg elbow,45-deg elbow,tee,cross,coupling,half-coupling,cap,square head plug,hex head plug,round head plug,hex head bushing,flush bushing,street elbows | ||||
| ASME B16.11 | Fogred socket weld fittings:90-deg elbow,45-deg elbow,tee,cross,coupling,half-coupling,cap | ||||
| MSS SP83 | Steel Pipe Unions(socket welding and threaded end) | ||||
| MSS SP95 | swage nipples,bull plug(ends may be threaded,beveled,plain) | ||||
| MSS SP79 | socket welding reducer inserts | ||||
| MSS SP97 | weldolets,threadolets,sockolets,flangolets,elbolet,sweepolets,saddle,nipolets,brazolets,latrolets,insertolets | ||||
Carbon Steel ASME B16.11 Forged Threaded Reducing Nipple:
ASTM/ ASME A 105, ASTM/ ASME A 350 LF 2, ASTM / ASME A 53 GR. A & B, ASTM A 106 GR. A, B & C. API 5L GR. B, API 5L X 42, X 46, X 52, X 60,
X 65 & X 70. ASTM / ASME A 691 GR A, B & C
ASME B16.11 Stainless Steel Forged Threaded Hex Nipple :
ASTM A182 F304, F304L, F306, F316L, F304H, F309S, F309H, F310S, F310H, F316TI, F316H, F316LN, F317, F317L, F321, F321H, F11, F22, F91, F347,
F347H, F904L, ASTM A312/A403 TP304, TP304L, TP316, TP316L
Duplex & Super Duplex Steel ASME B16.11 Forged Threaded Hex Nipple :
ASTM A 182 – F 51, F53, F55 S 31803, S 32205, S 32550, S 32750, S 32760, S 32950.
ASME B16.11 Alloy Steel Forged Threaded Hex Nipple:
ASTM / ASME A 182, ASTM / ASME A 335, ASTM / ASME A 234 GR P 1, P 5, P 9, P 11, P 12, P 22, P 23, P 91, ASTM / ASME A 691 GR 1 CR, 1 1/4 CR,
2 1/4 CR, 5 CR
ASME B16.11 Copper Alloy Steel Forged Threaded Reducing Nipple: ASTM / ASME SB 111 UNS NO. C 10100 , C 10200 , C 10300 , C 10800 , C 12000,
C 12200, C 70600 C 71500, ASTM / ASME SB 466 UNS NO. C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30)
Nickel Alloy Forged Threaded ASME B16.11 Reducing Nipple:
ASTM / ASME SB 336, ASTM / ASME SB 564 / 160 / 163 / 472, UNS 2200 (NICKEL 200) , UNS 2201 (NICKEL 201 ) , UNS 4400 (MONEL 400 ) ,
UNS 8020 ( ALLOY 20 / 20 CB 3 ) , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 (INCONEL 601) , UNS 6625 (INCONEL 625) ,
UNS 10276 (HASTELLOY C 276)
•Strength and Durability
•Leak-Free Performance
•Pressure Ratings: Forged pipe fittings generally have higher pressure ratings compared to fittings made by other methods.
This makes them ideal for systems that operate under high pressure conditions.
•Resistance to Corrosion
•Wide Range of Shapes and Sizes
•Quality and Consistency
•Longevity
Dimension of socket welding Fittings for 90-Deg Elbow, Cross, Tee, 45deg elbow
Note: Average of socket wall thickness a round periphery shall be no less than listed values.
The minimum values are permitted in localized areas. (All above data are for millimeters )
Forged high pressure fittings are commonly used in a variety of industries and applications involving high pressure fluid
or gas systems. Some specific applications and uses of forged high pressure fittings include: Oil and Gas Industry,
Power Generation, Chemical Processing,Pharmaceutical industry, Water Treatment, Mining and Construction,
Aerospace and Defense HVAC and Piping
Forged high pressure pipefittings here mentioned below are only a few of those covered by B16.11 standard. The physical
and chemical values indicated correspond to the latest issued standard, although they are affected by modifications
year after year, so we suggest to use them only as a guide.
Chemical Composition
| ASTM Designation | Analysis in % | ||||||||
| C | Mn | Si | Max. P | Max. S | Cr | Ni | Mo | ||
| A105 - 05 | |||||||||
| max. 0.35 | 0.60 - 1.05 | 0.10 - 0.35 | 0.035 | 0.04 | max. 0.3 3 4 | max. 0.4 3 4 | max. 0.12 3 | ||
| A182 - 07 | |||||||||
| Grades | F1 F5 F11 Cl. 1 | max. 0.25 max. 0.15 0.05 - 0.15 | 0.60 - 0.90 0.30 - 0.60 0.30 - 0.60 | 0.15 - 0.35 max. 0.50 0.50 - 1.00 | 0.045 0.030 0.030 | 0.045 0.030 0.030 | 4.00 - 6.00 1.00 - 1.50 | max. 0.50 | 0.44 - 0.65 0.44 - 0.65 0.44 - 0.65 |
| F11 Cl. 2 / Cl. 3 F22 Cl. 1 / Cl. 3 F304 1 | 0.10 - 0.20 0.05 - 0.15 max. 0.08 | 0.30 - 0.80 0.30 - 0.60 max. 2.00 | 0.50 - 1.00 max. 0.5 max. 1.00 | 0.040 0.040 0.045 | 0.040 0.040 0.030 | 1.00 - 1.50 2.00 - 2.50 18.00 - 20.00 | 8.00 - 11.00 | 0.44 - 0.65 0.87 - 1.13 | |
| F304 L 1 F316 1 F316L 1 F321 2 | max. 0.030 max. 0.08 max. 0.030 max. 0.08 | max. 2.00 max. 2.00 max. 2.00 max. 2.00 | max. 1.00 max. 1.00 max. 1.00 max. 1.00 | 0.045 0.045 0.045 0.045 | 0.030 0.030 0.030 0.030 | 18.00 - 20.00 16.00 - 18.00 16.00 - 18.00 17.00 - 19.00 | 8.00 - 13.00 10.00 - 14.00 10.00 - 15.00 9.00 - 12.00 | 2.00 - 3.00 2.00 - 3.00 | |
| A350 - 04 | |||||||||
| Grades | LF1 LF2 Cl. 1 LF2 Cl. 2 LF3 | max. 0.30 max. 0.30 max. 0.30 max. 0.20 | 0.60 - 1.35 0.60 - 1.35 0.60 - 1.35 max. 0.90 | 0.15 - 0.30 0.15 - 0.30 0.20 - 0.35 0.20 - 0.35 | 0.035 0.035 0.035 0.035 | 0.040 0.040 0.040 0.040 | max. 0.3 3 4 max. 0.3 3 4 max. 0.3 3 4 max. 0.3 3 4 | max. 0.4 3 max. 0.4 3 max. 0.4 3 3.3 - 3.7 | max. 0.12 3 max. 0.12 3 max. 0.12 3 max. 0.12 3 |
| A694 - 03 | |||||||||
| Grades | F42 / F52 / F56 F60 / F65 / F70 | max. 0.26 | max. 1.4 | 0.15 - 0.35 | 0.025 | 0.025 | |||
PHYSICAL PROPERTIES
| ASTM Designatioin | Tensile strength | Fluency limit Elongation in 50 mm. | Stress | Brinell | |||||
| Hardness (HB) | |||||||||
| Ksi min. | MPa | Ksi min. | MPa | % min. | % min. | ||||
| A105 - 05 | |||||||||
| 70 | 485 | 36 | 250 | 22 | 30 | 187 max. | |||
| A182 - 07 | |||||||||
| Grades | F1 | 70 | 485 | 40 | 275 | 20 | 30 | 143 - 192 | |
| F5 | 70 | 485 | 40 | 275 | 20 | 35 | 143 - 217 | ||
| F11 Cl. 1 | 60 | 415 | 30 | 205 | 20 | 45 | 121 - 174 | ||
| F11 Cl. 2 | 70 | 485 | 40 | 275 | 20 | 30 | 143 - 207 | ||
| F11 Cl. 3 | 75 | 515 | 45 | 310 | 20 | 30 | 156 - 207 | ||
| F22 Cl. 1 | 60 | 415 | 30 | 205 | 20 | 35 | 170 max. | ||
| F22 Cl. 3 | 75 | 515 | 45 | 310 | 20 | 30 | |||
| F304 | 751 | 5151 | 30 | 205 | 30 | 50 | 156 - 207 | ||
| F304L | 702 | 4852 | 25 | 170 | 30 | 50 | |||
| F316 | 751 | 5151 | 30 | 205 | 30 | 50 | |||
| F316L | 702 | 4852 | 25 | 170 | 30 | 50 | |||
| F321 | 751 | 5151 | 30 | 205 | 30 | 50 | |||
| A350 - 04 | |||||||||
| Grades | LF1 LF2 Cl. 1 LF2 Cl. 2 | 60 - 85 70 - 95 70 - 95 | 415 - 585 485 - 655 485 - 655 | 30 36 36 | 3 4 3 4 3 4 | 205 250 250 | 25 22 22 | 38 30 30 | 197 max. 197 max. 197 max. |
| LF3 Cl. 1 | 70 - 95 | 485 - 655 | 37.5 3 4 | 260 | 22 | 35 | 197 max. | ||
| LF3 Cl. 2 | 70 - 95 | 485 - 655 | 37.5 3 4 | 260 | 22 | 35 | 197 max. | ||
| A694 - 03 | |||||||||
| Grades | F42 | 60 | 415 | 42 | 290 | 20 | |||
| F52 | 66 | 455 | 52 | 360 | 20 | ||||
| F56 | 68 | 470 | 56 | 385 | 20 | ||||
| F60 | 75 | 515 | 60 | 415 | 20 | ||||
| F65 | 77 | 530 | 65 | 450 | 20 | ||||
| F70 | 82 | 565 | 70 | 485 | 18 | ||||
Raw Material A105& Stainless-steel bars for forged fittings
Cutting the bars to be proper length for forging
Forging Workshop
Stocks of the raw pieces without marching
Sand Blast to clean and smooth the surface
Machining process
Test the threaded to meet standards
Marking the specification and logo on forged fittings
1. Technical support
2. Raw Material Quality control.
3. Inspection during the production time.
4. Final Test includes Surface, Dimension, PT Test, RT test, ultrasonic Test
5. Test Report each shipment
4. Flexible Delivery terms. EXW FOB CIF CFR DDP DDU
5. Flexible payment Ways: LC. TT. DP
6. Customized Package includes Logo. Cases Dimension.
7. 18 months quality Guarantee time.
9. Free replacement by air if any error founded
10. 24 hours to Feedback your questions